The XDS95 from X2 delivers your tone and performance with the sound and feel of a direct wire connection - all at a price that wont break the bank.

All of this sound and performance is provided to you with an incredible feature set including: 24-bit digital converters yielding 117 dB dynamic range to capture your most expressive performances, five user-selectable operating frequencies, auto DigiScan™ to confidently select an open channel, frequency response all the way down to 10 Hz for truly thundering lows, TRS 1/4" output for instrument and full-bandwidth or tuner out applications, and a five segment LED display (battery status, link status, audio level and channel).

Operating the system is unlike any wireless you have tried before. Simply connect the transmitter to the source via the 1/8" threaded-collar locking connector and the "stomp-box" style receiver to your amplifier, mixer or pedal-board. Then power up making sure the transmitter and receiver are set to the same channel. That is it. You are ready to go! No knobs to adjust and no antennas to loose or break mean you are up and running in approximately the same time it takes to connect a cable.

With the XD Series Digital UHF Wireless System from X2, you will have the freedom and sound to deliver your most expressive performance every time without breaking the bank - a complete system lists for just $499 USD!

XDS95 Technical Specifications

Overall System Specifications
Transmission Format:	X2 proprietary digital audio transmission
Frequency Response:	10 Hz - 12 kHz
Audio Dynamic Range:	Greater than 117 dB
Distortion:	0.03% THD
RF Carrier Frequency:	902 MHz to 928 MHz, FSK
Number of Selectable Frequencies:	Five
RF Output Power:	10mw
Audio Output Level:	Unity gain with transmitter input
Polarity:	Positive voltage at input yeilds positive voltage at output
Transmission Range:	>150 feet line-of-sight (may vary due to local conditions)
FCC Approval:	Part 15 approved, no user-license required
XDT1 Transmitter Specifications
A/D Conversion:	24-bit Delta Sigma, 128 times over sampling
Input Impedance:	1.3 M-Ohm
Connectors:	1/8" Unbalanced locking connector
Controls:	Power On/Off, Channel Select
Five Segment LED Display:	Power On, Channel, Battery Life, Audio Level Meter
Dimensions:	3.078" W x 1.17" D x 4.7" H
Battery Life:	Switching power supply, ~12 Hours (9v alkaline)
Weight:	.25 lbs. (with 9v battery installed)
XDR1 Receiver Specifications
D/A Conversion:	24-bit Delta Sigma, 128 times over sampling
Output:	2.12V RMS (Unbalanced: 1.8K Ohm)
Connectors:	1/4" Unbalanced stereo output, tip= instrument voicing, Ring= full bandwidth, Sleeve= ground
LED Display:	Power On, Data Link, Channel, Battery Life, Audio Level Meter
Controls:	Power On/Off, Channel/Mode Select
Dimensions:	3.078" W x 1.17" D x 4.7" H
Power Requirements:	9V DC 100mA (~8hrs) or PSA120 type power supply
Weight:	.45lbs. Approx.