|
Overall System Specifications |
|
|
Transmission Format: |
X2 proprietary digital audio transmission |
|
Frequency Response: |
10 Hz - 20 kHz |
|
Audio Dynamic Range: |
Greater than 118 dB |
|
Distortion: |
0.03% THD |
|
RF Carrier Frequency: |
902 MHz to 928 MHz, FSK, dual frequency transmission |
|
Number of Selectable Frequencies: |
Five |
|
RF Output Power: |
15mw |
|
Audio Output Level: |
Unity gain with transmitter input |
|
Polarity: |
Positive voltage at input yeilds positive voltage at output |
|
Transmission Range: |
300 feet line-of-sight (may vary due to local conditions) |
|
FCC Approval: |
Part 15 approved, no user-license required |
|
Operating Temperature Range: |
-20 to +85 C (-4 to +185 F) |
|
|
|
|
|
|
|
XDT4 Transmitter Specifications |
|
|
A/D Conversion: |
24-bit Delta Sigma, 128 times over sampling |
|
Input Impedance: |
1.2 M-ohm |
|
Connectors: |
1/8" Unbalanced locking connector |
|
Controls: |
Power On/Off, Channel Select |
|
Five Segment LED Display: |
Power On, Channel, Battery Life, Audio Level Meter |
|
Dimensions: |
4 H x 2.4 W x .66 D in. |
|
Battery Life: |
9V alkaline, switching power supply, two modes: Q-DiversityPLUS mode: ~5.5 hrs in (dual frequency) Q-Diversity mode: ~6.5 hrs in standard (single frequency) |
|
Weight: |
.25 lbs. (with 9v battery installed) |
|
Housing: |
Polycarbonate, impact tested to 300 lbs. |
|
|
|
|
XDR4 Receiver Specifications |
|
|
D/A Conversion: |
24-bit Delta Sigma, 128 times over sampling |
|
Output: |
2.12V RMS (Unbalanced: 1.8K Ohm) |
|
Connectors: |
1/4" Unbalanced TRS output 1.8K-ohm impedance, tip= instrument voicing, ring= full bandwidth, sleeve= ground, XLR Balanced 600 ohm |
|
LED Display: |
Power On, RF, Channel, Diversity, Battery Life, Audio Level Meter |
|
Controls: |
Power On/Off, Channel/Mode Select |
|
Dimensions: |
1.75 H x 16.2 W x 7.5 D in. |
|
Power Requirements: |
9V DC 500mA via included AC/DC adapter |
|
Weight: |
2.5 lbs (with rack hardware and antenna installed) |
|
Housing: |
Polycarbonate, impact tested to 300 lbs. |