RANDALL RM100M1 MTS SERIES ALL-TUBE HEAD
Our flagship sets the standard and will forever revolutionize how future tube heads are designed. The RM100 is both traditional & modern technology rolled into one amplifier. First you have 3 independent modular channels that can be loaded with your choice and combination of the available tube preamp modules. Load each channel with a preamp tone that fits only your needs with the ability to expand your arsenal anytime a new tone is needed. Donít purchase an amplifier because you like just the clean or hi-gain tone. Build this amp with your clean, your rhythm, and your hi-gain tone for a complete custom set-up. With more than a dozen tube preamps always available, chances are youíll have a hard time picking just three.
CHANGE AND BIAS YOUR OWN POWER TUBES!
Enjoy the ease of replacing your power tubes anytime you like with the very user friendly power tube bias section found on each MTS amplifier. If a tube fails, no problem, the amp will kick that tube out of the circuit and a small LED will light by the tube that fails. Simply replace the small protection fuse and tube using a small voltage meter and screwdriver to adjust each individual bias point. If you like experimenting with different tube types, the bias section allows you to pop-in and bias a new set of tubes in just a few minutes.
MIDI CHANNEL SWITCHING CAPABILITY!
Connect your RM100 to any MIDI capable effects processor and program individual effects to each channel. With the MIDI in/thru jacks simply select your channel and external effect using the included RF3 MIDI footswitch, press and hold the channel switch button on the head for 2 seconds and hit the store button of the effects processor to save the preset. The included footswitch will then select both the RM100 channel and effect you want at the same time.
- 3 Modules
- 100 Watts
- 6L6 Power tubes
- MIDI in/thru
- Master Volume, Presence, Density controls
- Parallel loop w/front panel mix control
- Series loop
- Rear tube bias section
- Slave out
- 3-button MIDI footswitch included
- World voltage AC input selector (100/120/220/240)
Buy Product Online | Visit Store Home