The EB 12-180 1 x 12" combo uses a 180 Watts RMS fan-cooled fast-transient power stage, and a fully-featured bass preamplifier with inputs for both active and passive instruments, an illumunated VU meter, 5 band EQ with Bright and Deep switches, a front panel-mounted balanced DI output for connection to a PA or recording console, an FX loop, a tuner/line output and the classic Ashdown sub-harmonic generator.
Consistent with its EVO II status, the combo also includes a built-in compressor to provide an exceptional level of sonic control for a bass amp of this size and cost.
A high-performance Ashdown BlueLine bass driver ensures exceptional attack, clarity and low-end performance, while an extension speaker output can be used to connect an additional cabinet for use in larger venues. The cabinet is finished in a tough, scuff-proof carpet covering with protective corners and a kick-proof metal grille.
|Power Requirement:||230 /115v|
|Speaker Configuration:||1 x 12" BlueLineSpeaker|
|Frequency Response:||-3dB at 33Hz and 25KHz|
|Speaker Outputs:||Minimum impedance 4 Ohms|
|High Instrument Input:||Impedance 3.9MOhms / Input range 150mV - 20V p-p|
|Low Instrument Input:||Impedance 10KOhms / Input range 300mV - 40V p-p|
|Line Input:||Impedance 22k Ohms / Input level 0dBu nominal|
|DI Output:||600 Ohms balanced / Level -20dBu nominal|
|Tuner Output:||Impedance 22k Ohms / Level 0dBu nominal|
|Signal to noise:||Better than 80dB (EQ flat)|
||Bass +/-15dB @ 100Hz|
Lo Mid +/-15dB @ 220Hz
Middle +/-15dB @ 660Hz
Hi Mid +/-15dB @ 1.6kHz
Treble +/-15dB @ 7kHz shelving
Deep +8dB @ 50Hz
Bright +10dB @ 10kHz
|Effects Send:||Impedance 22k Ohms / Level 0dBu nominal|
|Effects Return:||Impedance 22k Ohms / Level 0dBu nominal|
|Distortion:||Less than 0.5% THD|
|H x W x D (mm):||501 x 474 x 300|